General Safety Instructions; Test Symbols; Appliance Description; Immersion Heater Accessory: Settings - STIEBEL ELTRON SBP 100 Operation And Installation

OPERATION

Appliance description

2.2

General safety instructions

WARNING Burns
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
WARNING Injury
!
The appliance may be used by children aged 8 and older
and persons with reduced physical, sensory or mental
capabilities or a lack of experience and know-how, pro-
vided that they are supervised or they have been in-
structed on how to use the appliance safely and have
understood the resulting risks. Children must never play
with the appliance. Children must never clean the ap-
pliance or perform user maintenance unless they are
supervised.
With immersion heater accessory:
Material losses
!
The user must protect the water pipes and safety valve
from frost.
2.3

Test symbols

See type plate on the appliance.
3. Appliance description
This pressurised appliance is equipped with a quick-action air vent
valve and a cleaning aperture with drain & fill valve.
An immersion heater can be retrofitted.
Frost protection with immersion heater accessory
If the power supply is guaranteed, the appliance is also protected
from frost on the temperature setting "cold". The appliance switch-
es on in good time and heats the water. The appliance does not
protect the water pipes and safety valve from frost.
24 | SBP 100
4. Immersion heater accessory:
Settings
The temperature is variably adjustable.
2
1 ON/OFF indicator
2 Frost protection
65 °C maximum temperature setting
Depending on the system, the actual temperatures may vary from
the set value.
ON/OFF indicator
The ON/OFF indicator illuminates when water is being heated.
5.

Cleaning, care and maintenance

f Have the function of the safety assembly and electrical safe- f
ty of the fitted accessories regularly checked by a qualified
contractor.
f Never use abrasive or corrosive cleaning agents. A damp f
cloth is sufficient for cleaning the appliance.
f Regularly activate the safety valve to prevent it from becom- f
ing blocked.
6.

Troubleshooting

Call your qualified contractor.
To facilitate and speed up your enquiry, please provide the serial
number from the type plate (000000-0000-000000):
1
65°C
000000-0000-000000
Made in Germany
www.stiebel-eltron.com