Star Micronics FR-10 User Manual page 37

Set condensedprint mode
Both
<ESC> <S1>
IBh Om
27 15
<S1>
oFh
I
I
Eitherof the two commandsabove will set condensedprint mode. There are no
parameters.Subsequentprintingwill take place at approximately1.7 times the
numberofcharacters/inch thanwaspreviouslythecase.Thisis cancelledonreceipt
of a cDC2>command. T hiscommandwillbe ignoredifPitchPanelLockmodehas
been selected.
I Cancelcondensedprint mode
Standard
i
12h
18
Thecommandabove cancelsthecondensedprint m ode.Therearenopammeters.On
receiptof this command,all subsequent p rintingwillbe doneat the pitch selected
priorto a cESC>
<S1>
or <S1>command.Thiscommandwillbe ignoredif Panel
PitchLock modehasbeen selected.
Select/cancelproportionalprinting
Both
CEsc>
P
<w
IBh 70h
<?0
27 112
</0
The sequenceaboveselectsor cancelsproportional p rinting,whereen> is a binary
or ASCIIvaluefmm OOh throughOlh or "O"through"l". If <n>–+tlhor "O",then
proportional p rintingisdeselected(cancelld), andif a>=olh or "l", then
propor-
tional printing is selected. This command
willbe ignoredif PanelPitchLock mode
hasbeen selected.
31