Shorttear-Offfunction - Star Micronics FR-10 User Manual

4
5
6
7
8
9
Insertthe cut sheetpaperin the paper guides
Pressthe
6fi~~ECTPAR~
buttonin orderto feedthe cut sheetto the startingprint
position.The printer will automaticallygo on-line.
Print as normalon the cut sheet(s),andwhenyouhaveftished printing,
put the printeroff-line(by p~ssing the .
ONLNE.;
buttonagtin).
If the softwarehas not donethis for you,eject the paper by pressingthe
@IS!:@ button.
Move the releaselever to the front of the paper (~position) to select
fanfoldpaper (engagingthe fanfoldsprockets).
Now feed the fanfoldpaperto the printpositionby pressingthe
{EKJECTP(R]
button.The paper will moveto its formerprintposition,and the printer
will automaticallygo on-line.
You are now ready to start printingon fanfoldpaper again.
Short tear-offfunction
The short-tear-off
function is handy when using fanfold paper. It ejects the
paper so that the perforation isjust above the transparent cover, allowing you
tear it off
withouthavingto open up the printer.It then reversesthe paper
feed afteryouhavetom off the paper,the~by startingprintingat the top of
the next form.This featureis especiallyusefulif you are usingpre-printed
stationery(such as invoices,etc), whichwill not be printedall together.
To use the shorttear-offfunction,pressthe{
ON"LINEI
buttonwhenthe printer
is on-line,andholdit downfor a few seconds.Whenyoureleasethebutton,
thepnnter willgooff-line,andthepaperwillmoveup a fewinches,allowing
you to tear off the form.
To ~tum the paperto its previousposition,press the
ONLINE
buttononce
again. When you ~lease the button, the printer will return to its on-line
status,andthepaperwillbe fedbackwards,withtheprintheadalignedwith
the top of the next form.
15