Table of Contents
Advertisement
Micro Feed
The Micro
Feed facilityis usefulif you wish to alignthe paper exactly.It
feedsthe paper forwardsor backwardsin l/216th inch increments.
To use this featwe, put the printeroff-line(usingthe (-
button).
Then press the @@> button, and either the
(PAP-O)
button (to feed the
paper forwatis), or the @W@ button(to feed the paper backwards).
Holdingdownthesebuttonscontinuously willcontinueto feedthepaperfor-
wardsor backwardsin small increments.
BUFFERCLEAR/RESET
It is possibleto clearthe buffer of the printeror to mtum it to its power-on
statusby usingthe frontpanelbuttonswithouthavingto turn the poweroff
andon.To dothis,puttheprinteroff-line(pressthe [ON
L~.1
button),andthen
press the :-0N~i~~7
button again.Before releasingthe ("~~
button,hold
downthe
"F!NT
button.Releasingthe (:0~~1 b uttonwithintwo secondsof
holdingit down (beforereleasingthe C
ON.LNSI
button)will clear the data in
the buffer.Releasingthe buttonafter two seconds(again,before releasing
the @~-' button)will reset the printerback to the settingsat power-on.
TEST AND MAINTENANCE SETTINGS
The
p rinterisequippedwithanumberoffunctionsto assisttestingandmain-
tenance.Sinceit is anticipatedthattheywillnotbe usedveryoften,theyare
not describedhem, but in Chapter6.
However,briefly,they are:
A text test printmode
A short test printmode
A long test print mode
. A hexadecimaldump mode
A bidirectionalprint test
16
Advertisement
Table of Contents
