Oncethepaperhasbeenloaded - Star Micronics FR-10 User Manual

I
7 Nowpnxthe @&@button.Thepaperbailwi llmoveclearof thepaper,
and the paper will be fed and adjustedpast the print head to a position
~ady for printing.The paperbail will be movedback to grip the paper
againstthe platen,and the printhead willmoveto the startposition.As
whenloadingcut-sheetpaper,theMemorySwitchsettingwilldetermine
the initialpositionof the paper after auto-feeding,and the micm feed
functionmay be used to adjustthe paperposition.
8 Remountthe top cover rear cover and the transparentprintercover.
9 Remountthe paperguideas shownbelow:
Once thepaper has been loaded
The printerwillnowbe on-line(theON
LINE
indicatorwillbe lighted).You
may nowwantto choosea font,a pitchanda printquality.Thiscanbe done
from the frontpanel,but you must put the printeroff-linefirst by pressing
the.[=~~~-;button.The indicatorwill go out and the printer will beep to
confirmthis.
10