Table of Contents
Advertisement
You always send the following Print Pattern command after a Specify
Pattern command. This Print Pattern command identifies whether the area
you have defined is to be filled with a rule, dotted gray-scale pattern, or linear
pattern:
<ESC>
*C n
P
For n enter a value from the following table. (If you select a linear pattern
here, but a dotted pattern in the previous Specify Pattern command, the
printer will ignore this Print Pattern command.)
n Value
Pattern
O(zero)
solid black
1
solid (opaque) white
'2
shaded fill (as selected with <ESC> *c n G)
3
cross-hatched fill (as selected with <ESC> *c n G)
5
current pattern fill (as selected with <ESC> *v n T)
If n = 5 has been selected, you will need the following command.
<ESC>
*
n
T
This command selects the current pattern type to be applied to source images
(not rectangular areas) before printing.
17 Value
Pattern
O(zero)
Solid black
1
Solid white
2
Currently defined shading pattern
4
Currently defined cross-hatched pattern
Fern = 2 or 3, the pattern defined by the most recent <ESC> *cn G command
is used. To change the pattern, a new <ESC> *c n G and a new <ESC> *V
n T command are needed.
91
Advertisement
Table of Contents
