Table of Contents
Advertisement
The meaning of a line (sometimes called a "row") is defined by the t'ertical
motim?index (VMI). The printer moves the print position down a line when
it gets a Line Feed code, usually when it bumps into the right margin.
You'll probably let your computer program set the line depth. But from the
panel you can.set the VMI value in increments from 1/48to 255/48 of an inch.
Auto'parameters
The print position refers to the point on the page where the next character
will be printed. When the printer reaches the end of a line, the Auto
Parameters settings tell it whether or not to automatically:
. move the print position down one line (Iinefeeci),
. or keep text out of the side margin (auto wrap).
2.3.4 Moving the print position: a preview
With dot-matrix printer, you pick where to print on the page either by moving
the printhead back and forth or by moving the paper itself. Laser printers
don't have printheads, but the principle remains the same: you have to say
exactly where on the page each picture and string of text is to go, so each page
can be constructed in the printer's memory.
Instead of talking about printheads we talk about moving the print posifion
(some people call it moving the "cursor", using the computer-screen anal-
ogy). Horizontally, you can move the print position with backspace and
carriage< return commands. Vertically, you can move the print position down
the page by printing so many lines per inch, or by sending line-feed and half
line-feed commands. You can also move to tab settings both horizontally and
vertically (handy for tables and blank forms, or making room for your
diagrams).
But those aren't all. You can tell the Star LaserPrinter 4111 to move the print
position vertically or horizontally in increments of:
1/10, 1/12 or similar fractions of an inch (pitch settings),
1/48, or 1/120 inch (line or column definitions),
.
1/300 inch (dots), or
1/720 inch (tenths of a point).
24
Advertisement
Table of Contents
