Star Micronics 4111 Applications Manual page 109

5
P s
There are two escape sequences to define the plot size of the drawing:
<ESC>
*C t7
K
in which
t7 is
the horizontal size of the GL/2 plot in inches.
<ESC>
*C H
L
in which n is the vertical size of the GL/2 plot in inches.
These commands fit the GL/2 plot into the picture frame, establishing scaling
factors using the formula:
(plot size)/(picture frame size divided by 720)
If ~iin either of these is zero, the default values (the size of the picture frame)
are used.
1