Dismantling; Pushing Handgrips; Safety Belt - Vermeiren Four Light Instruction Manual

7. Dismantling

L CAUTION: Chance of pinching - Do
not place fingers
components of the rollator.
L
CAUTION: Risk of clamping - Keep
fingers away from moving parts of the
rollator.
1. Adjust the pushing handgrips to the
minimum position (see further).
2. Folding rollator
1
• Pull the seat handgrip  upwards.
• Push the seat upwards until the rollator
is completely folded.
• Click the attachment plate  to the tube
of the seat.
3. Removing front wheels
• Press the red button on the front wheel
to remove the front wheel.
• Pull the front wheel out the rollator
frame.
• Repeat for the other front wheel.
4. Removing rear wheels
between the

8. Pushing handgrips

L
L
2

9. Safety belt

EN - 3
• Press the spring button on both sides to
remove the rear wheel.
• Remove the rear wheel out the rollator
frame.
• Do not remove the brake cables.
• Repeat for the other rear wheel.
CAUTION: Risk of falling - Firmly fix
the handgrips before
rollator.
CAUTION: Risk of falling - Do not
exceed the maximum
your rollator will
anymore.
• Loosen the red adjustment button.
• Pull the handgrips a little bit upwards
and check they are firmly secured.
Four-Light
2017-12
using the
adjustment,
not be stable
The pushing
handgrips can be
adjusted in height
by following
steps:
• Push on the red
adjustment
button.
• Move
the
handgrips
upwards/down
wards until the
desired position
(6 different
positions in
steps of 25
mm).
The safety belt
can be adjusted
in height by
following steps:
• Loosen the star
knob to adjust
the height of the
safety belt.
EN
NL
PL
CS