Table of Contents
Advertisement
3 Keysight SD1 Command Reference
Name
nDAQ
triggerNumber
errorIn
Outputs
moduleIDOut
errorOut
C
int SD_AIN_DAQanalogTriggerConfig (int moduleID, int nDAQ, int triggerNumber);
C++
int SD_AIN::DAQanalogTriggerConfig (int nDAQ, int triggerNumber);
Visual Studio .NET, MATLAB
int SD_AIN::DAQanalogTriggerConfig (int nDAQ, int triggerNumber);
Python
int SD_AIN::DAQanalogTriggerConfig (int nDAQ, int triggerNumber);
LabVIEW
DAQanalogTriggerConfig .vi
M3601A
Available: No
3. 3. 2. 7 DAQread
This function reads the words acquired with the selected DAQ
(DAQs). It can be used only after calling the function
a callback function is not configured. DAQread is a blocking function released when
the configured amount of words is acquired, or when the configured timeout elapses
(if timeout is set to "0" , then DAQreadwaits until DAQpoints are acquired). In the
timeout elapses, there may be words available, but less than the configured amount.
44
Description
returned by function
open on page 28
DAQ number
Analog trigger number
(LabVIEW only) If it contains an error, the function will
not be executed and errorIn will be passed to errorOut
(LabVIEW only) A copy of moduleID
Keysight SD1 Command Reference on page 23
Keysight M3100A/M3102A PXIe Digitizer User's Guide
Data Acquisition
DAQconfig on page 41
and when
Advertisement
Table of Contents
