Table of Contents
Advertisement
3. 3 Functions in SD1 Programming Libraries
The following functions are available in Keysight SD1 Programming Libraries.
SD_Module Functions on page 28
Function Name
open on page 28
close on page 30
moduleCount on page 31
getProductName on page 32
getSerialNumber on page 33
getChassis on page 34
getSlot on page 35
PXItriggerWrite on page 36
PXItriggerRead on page 37
SD_AIN Functions on page 38
Function Name
channelInputConfig on page 38
channelPrescalerConfig on page 39
channelTriggerConfig on page 40
DAQconfig on page 41
DAQdigitalTriggerConfig on page 42
DAQanalogTriggerConfig on page 43
DAQread on page 44
DAQstart on page 46
DAQstartMultiple on page 47
DAQstop on page 48
DAQstopMultiple on page 49
DAQpause on page 50
DAQpauseMultiple on page 51
DAQresume on page 52
Keysight M3100A/M3102A PXIe Digitizer User's Guide
3 Keysight SD1 Command Reference
Comments
Initializes a hardware module and must be called before using
any other module-related function.
Releases all resources that were allocated for a module with
open on page 28
and must always be called before exiting the
application.
Returns the number of Keysight SD1 modules in the system.
Returns the product name of the specified module.
Returns the serial number of the specified module.
Returns the chassis number of where a module is located.
Returns the slot number of where a module is located.
Sets the digital value of a PXI trigger in the PXI backplane.
Only available in PXI/PXI Express form factors.
Reads the digital value of a PXI trigger in the PXI backplane.
Only available in PXI/PXI Express form factors.
Comments
Configures the input full scale, impedance and coupling.
Configures the input prescaler.
Configures the analog trigger block for each channel Analog
Trigger.
Configures the acquisition of words in two possible reading
modes.
Configures the digital hardware triggers for the selected DAQ
Trigger.
Configures the analog hardware trigger for the selected DAQ
Trigger.
Reads the words acquired with the selected DAQ Data
Acquisition (DAQs).
Starts an acquisition on the selected DAQs Data Acquisition
(DAQs).
Starts an acquisition on the selected DAQs Data Acquisition
(DAQs).
Stops the Data Acquisition (DAQs).
Stops multiple channels of Data Acquisition (DAQs).
Pauses the Data Acquisition (DAQs).
Pauses multiple channels of Data Acquisition (DAQs).
Resumes acquisition on the selected DAQs.
25
Advertisement
Table of Contents
