Log - D-Link DIR-878 User Manual

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual

Log

On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter
Type
Level
Server
Port
After specifying the needed parameters, click the APPLY button.
To disable logging of the system events, move the Enable switch to the left and click the APPLY
button.
To view the system log, go to the Log tab.
Figure 132. The System / Log page. The Settings tab.
Select a type of logging from the drop-down list.
Local: the system log is stored in the router's memory. When
•
this value is selected, the Server and Port fields are not
displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Remote and local: the system log is stored in the router's
•
memory and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
A port of the host specified in the Server field. By default, the value
514 is specified.
Page 171 of 191
Configuring via Web-based Interface
Description