D-Link DIR-878 User Manual page 93

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual
Figure 77. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter
Mode of dynamic IPv6
address assignment
Start IPv6
End IPv6
Lease time
When all needed settings are configured, click the APPLY button.
Dynamic IPv6 Addresses
Select the needed value from the drop-down list.
Disable: clients' IPv6 addresses are assigned manually.
Stateful: the built-in DHCPv6 server of the router allocates
addresses from the range specified in the Start IPv6 and End IPv6
fields.
Stateless: clients themselves configure IPv6 addresses using the
prefix.
The start IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The end IPv6 address of the address pool used by the DHCPv6
server to distribute addresses to clients.
The lifetime of IPv6 addresses provided to clients. The field is
available for editing if the Static value is selected from the Mode
of local IPv6 address assignment list in the Local IPv6
Address section.
Page 93 of 191
Configuring via Web-based Interface
Description