D-Link DIR-878 User Manual page 98

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual
In the General Settings section, the following parameters are available:
Parameter
Enable Wireless
Country
Wireless mode
Select channel
automatically
Enable additional
channels
Channel
Enable periodic
scanning
Scanning period
When you have configured the parameters, click the APPLY button.
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
The country you are in. Select a value from the drop-down list.
Operating mode of the wireless network of the router. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Move the switch to the right to let the router itself choose the
channel with the least interference.
If the switch is moved to the left, the device automatically selects
one of available standard channels. To use additional channels (the
12th and 13th – in the 2.4 GHz band, the 100th and higher – in the 5
GHz band), move the switch to the right.
The wireless channel number. Left-click to open the window for
selecting a channel (the action is available, when the Select
channel automatically switch is moved to the left).
Move the switch to the right to let the router search for a free
channel in certain periods of time. When the switch is moved to the
right, the Scanning period field is available for editing.
Specify a period of time (in seconds) after which the router rescans
channels.
Page 98 of 191
Configuring via Web-based Interface
Description