Creating Dynamic Ipv4 Or Static Ipv4 Wan Connection - D-Link DIR-878 User Manual

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual

Creating Dynamic IPv4 or Static IPv4 WAN Connection

On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 52. The page for creating a new Static IPv4 connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 65 of 191
Configuring via Web-based Interface
Description