D-Link DIR-878 User Manual page 87

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
Configuring via Web-based Interface
User Manual
Figure 71. The page for creating a new PPPoE Pv6 connection. The IP section.
Parameter Description
IP
Select a method for IPv6 address assignment from the drop-down
Get IPv6
list or leave the Automatically value.
Move the switch to the right to automatically assign the IPv6
Gateway by SLAAC
gateway address with help of SLAAC (Stateless Address
Autoconfiguration).
The address of the IPv6 gateway. The field is available for editing if
Gateway IPv6 address
the Gateway by SLAAC switch is moved to the left.
Move the switch to the right to configure automatic assignment of
Obtain DNS server
IPv6 DNS server addresses. Upon that the Primary IPv6 DNS
addresses
server and Secondary IPv6 DNS server fields are not available
automatically
for editing.
Primary IPv6 DNS
Enter addresses of the primary and secondary IPv6 DNS servers in
server/Secondary IPv6
the relevant fields.
DNS server
Page 87 of 191