D-Link DIR-878 User Manual page 100

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
Configuring via Web-based Interface
User Manual
Parameter Description
Wi-Fi Network
A name for the wireless network. The name can consist of digits and
Network name (SSID)
Latin characters.
If the switch is moved to the right, other users cannot see your Wi-Fi
Hide SSID
network. It is recommended not to hide the network in order to
simplify initial configuration of the wireless network.
The unique identifier for this wireless network. You cannot change
the value of this parameter, it is determined in the device's internal
BSSID
settings. The field is displayed in the settings of the existing wireless
network.
The maximum number of devices connected to the wireless network.
Max associated clients When the value 0 is specified, the device does not limit the number
of connected clients.
Move the switch to the right to limit the maximum bandwidth of the
wireless network. In the Shaping field displayed, specify the
Enable shaping
maximum value of speed (Mbit/s).
Move the switch to the left not to limit the maximum bandwidth.
If the switch is moved to the left, devices cannot connect to the
Broadcast wireless
wireless network. Upon that the router can connect to another access
network
point as a wireless client.
Move the switch to the right to forbid wireless clients of this
Clients isolation
wireless network to communicate to each other.
This function is available for the additional network. Move the
switch to the right if you want the devices connected to the
Enable guest network
additional network to be isolated from the devices and resources of
the router's LAN.
Available for the additional network.
Move the switch to the right to allow authorized access to the
Internet via the NSG service for users of the additional wireless
Enable NSG service
network.
To configure the service, go to the Advanced / NSG page (see the
NSG section, page 130).
Page 100 of 191