Faults; Possible Faults And Removal - Hettich AxisDrive IPS Operating And Mounting Instructions Manual

8. Troubleshooting

8.2 Faults

This chapter provides detailed information on the following
subjects:
Possible faults and their removal

23
23

8.2.1 Possible faults and removal

The double drive does not work
Possible cause
The power supply Connect the mains supply.
cable is not plugged
in.
Drive system Contact your supplier / dealer
defective
Handset / Replace the handset / transmitter.
transmitterdefective
The double drive suddenly cannot be adjusted anymore
Possible cause
The power supply Connect the mains supply.
cable is not
plugged in.
The emergency lowering function cannot be activated
Possible cause
9V block battery Check the 9V block battery and
flat replace it if necessary.
9V block battery Connect the 9V block battery.
not properly
connected
Remedy
Remedy
Remedy