Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hettich AxisDrive IPS
Summary of Contents for Hettich AxisDrive IPS
- Page 1 Operating and mounting instructions AxisDrive...
-
Page 2: Preface
Hinter dem Ziegelwasen 6/1 72336 Balingen Copyright for the operating and mounting instructions © 2016 by Hettich Franke GmbH & Co. KG The copyright in these operating and mounting instructions shall remain with Hettich Franke GmbH & Co. KG. These operating and mounting instructions are intended for the mounting staff. -
Page 3: Table Of Contents
6.1.2 Connecting the handset / transmitter 6.1.3 Connecting the power supply cable 7. Operation 7.1 Basic functions 7.1.1 Commissioning the AxisDrive IPS 7.1.2 Commissioning the AxisDrive IPS RF 7.2 Emergency lowering functions 8. Troubleshooting 8.1 Safety notes 8.2 Faults 8.2.1 Possible faults and removal 9. -
Page 4: List Of Figures
List of Figures Figure Page Fig. 1: AxisDrive IPS / IPS RF Fig. 2: Handset cable Fig. 3: Transmitter Fig. 4: Nameplate Fig. 5: Boxspring bed Fig. 6: Slatted bed frame Fig. 7: Sliding covers Fig. 8: Dimensions AxisDrive IPS Fig. -
Page 5: Introduction
1. Introduction 1.1 Notes on signs, symbols and marks The operating and mounting instructions are to make it easier The safety notes in the operating and mounting instructions for you to get to know the double drive and to use its are structured as follows: intended applications. -
Page 6: Notes For The Operator
1. Introduction 1.2 Notes for the operator In addition to these operating and mounting instructions and the rules on accident prevention that are binding in the country of use or at the site of use, the recognised technical rules for safety-compatible and professional work must be observed as well. -
Page 7: General
This shall also apply in case of improper installation or removal, improper use, unprofessional treatment and wrong operation, or if Hettich Franke is not at fault for damage for any other reasons. -
Page 8: Scope Of Delivery
of the prohibition of independent conversion and modification Fig. 1: AxisDrive IPS / IPS RF of the use of components not released by the manufacturer shall exclude liability of the manufacturer for ... -
Page 9: Safety
3. Safety The operating and mounting instructions use the following marks for danger points (purs. to ASR A1.3): Danger Warning Danger to children! Danger of injury! Keep children away from packaging and There is a danger of injury from moving parts. mounting material. -
Page 10: Safety Notes For The User Company
3. Safety 3.2 Safety notes for the operating staff 3.1 Safety notes for the user company The double drive must only be taken into operation when All persons charged with operation of the double drive completely mounted in dry rooms and ready for operation. (including supervisors) must be familiar with the chapter "Safety Notes". -
Page 11: Nameplate
3.3 Nameplate The illustrated nameplate is an example. Its contents may vary from yours. Fig. 4: Nameplate Data (acc. o nameplate) Meaning AxisDrive IPS Model description 2.64.208.00.20 Reference No. 100 – 240 VAC Input voltage / mains connection 50 / 60 Hz... -
Page 12: Description Of The Product
4. Description of the Product 4.2 Device components 4.1 Technical data Designation: Double drive for adjustment of The double drive AxisDrive is an electro-motor-powered unit. Using suitable fittings for motorized adjustment, the head and/or comfort beds for use at home foot section of boxspring beds (Fig. -
Page 13: Dimensions Of The Housing And Handset / Transmitter
4.2.2 Dimensions of the motor hooks/fittings for mot. 4.2.1 Dimensions of the housing and handset cable/transmitter adjustment Fig. 12: Position of motor hooks/fittings for mot. adjustment Fig. 8: AxisDrive IPS Fig. 9: AxisDrive IPS RF Fig. 10: Handset cable Fig. 11: Transmitter... -
Page 14: Transport And Mounting
5. Transport and Mounting 5.2 Mounting 5.1 Transport Move the double drive / slatted bed frame only when powered Danger down (power cable disconnected from the mains). Danger to life from electric power! The housing of the double drive must not be opened, removed or damaged. -
Page 15: Installing The Double Drive And Handset / Transmitter
5. Transport and Mounting 5.2.2 Installing the Stress relief 5.2.1 Installing the double drive and handset cable/transmitter Move the slatted bed frame into the basic position. Warning Warning of crushing danger! Mount the double drive in an unloaded position. Only this way can it be prevented that hands are crushed or otherwise injured. -
Page 16: Electrical Connection
5. Transport and Mounting 5.2.4 Connection of the block battery 5.2.3 Electrical connection The double drive is designed for alternating current; see section 4.1 "Technical Data". According to the power intake (see name plate), a shockproof socket or a protective device according to the relevant and / or country-specific provisions (only to be installed by Battery compartment electricians) must be provided on site. -
Page 17: Commissioning
6. Commissioning 6.1 Initial commissioning Commissioning includes the work that is required Observe the following before initial commissioning of the slatted bed frame: so that an electrically adjustable bed / slatted bed frame Check that the slatted bed frame has been installed according can be adjusted with the double drive. -
Page 18: Connecting The Handset / Transmitter
6. Commissioning 6.1.3 Connecting the power supply cable 6.1.2 Connecting the handset / transmitter Connect the cable of the handset to the 5-pin socket (see Warning Fig. 18, chapter 7.1.1 commissioning). Warning! Before connecting the power supply cable, check Note again You can choose between a handset and a ·... -
Page 19: Operation
7. Operation 7.1 Basic functions Observe the following safety notes to ensure safe operation of Upward movement of the head section: the double drive: Push the upper left key. Downward movement of the head section: Danger Push the upper right key. Danger to life! There is a danger to life from electric shock! Upward movement of the foot section:... -
Page 20: Commissioning The Axisdrive Ips
7. Operation 7.1.1 Commissioning AxisDrive IPS 7.1.2 Commissioning the AxisDrive IPS RF with transmitter (Optional) Entry for cable of handset Coding button Entry for cable of handset Fig. 19 Commissioning AxisDrive IPS RF Stress relief Fig. 18: Commissioning AxisDrive IPS... -
Page 21: Emergency Lowering Functions
7. Operation 7.2 Emergency lowering functions To make it possible to move to the lying position in any case at power outage, the double drive has an emergency lowering function that is permitted by an integrated 9V block battery. Connect the battery according to 5.2.4 “Connection of the Block Battery“. -
Page 22: Troubleshooting
8. Troubleshooting 8.1 Safety notes Faults at the double drive must only be removed by specialists Warning who have been charged by the responsible person. Safety provisions when determining the cause of the fault or when removing faults! The entire environment of the double drive must be observed Observe the accident prevention provisions! when determining the cause of the fault. -
Page 23: Faults
8. Troubleshooting 8.2 Faults 8.2.1 Possible faults and removal The double drive does not work This chapter provides detailed information on the following Possible cause Remedy subjects: Possible faults and their removal The power supply Connect the mains supply. cable is not plugged Drive system Contact your supplier / dealer... -
Page 24: Maintenance And Servicing
9. Maintenance and Servicing 9.1 Maintenance 9.2 Care and cleaning The double drive AxisDrive is maintenance-free. The service life of the double drive depends on intended use. Warranty for proper function and operational safety can only be ensured at proper handling of the drive system and observation of the notes in the operating instructions and the corresponding provisions. -
Page 25: Decommissioning
10. Decommissioning When decommissioning, disconnect the power supply cable from the mains. Danger Danger from electric shock! Work at electrical equipment must only be performed by authorised electricians! Note If you are not going to use the double drive or the transmitter for an extended period, take out the battery to prevent damage to the double drive or the transmitter from leaking batteries. -
Page 26: Disposal
11. Disposal 11.1 Environmental protection Dispose of the parts environmentally compatibly, sorted by Caution materials. Electrical parts must be disposed of as hazardous Caution! waste. Observe the statutory obligations for avoiding waste and for proper recycling/disposal! Particularly during installation, repair and maintenance work, water-hazardous substances such as lubrication grease or ·... -
Page 27: Scrapping
11. Disposal 11.2 Scrapping If the double drive is finally taken out of operation, the laws and provisions applicable at this time regarding disposal must be observed. Batteries must be disposed of according to the AltBattVO This produce is not subject to the EU-directive 2002/96/EC (WEEE) and its supplement EU-directive 2003/108/EC To prevent danger to life from electric shock: Danger... -
Page 28: Ec Declaration Of Incorporation
The special technical documents can be requested from: Gerd Stumpp, Hettich Franke GmbH & Co. KG, 72336 Balingen (Name, address) The product also complies with the following European directives:... - Page 30 Hettich Franke GmbH & Co.KG Hinter dem Ziegelwasen 6/1 72336 Balingen...