Description Of The Product; Technical Data; Device Components; Fig. 5: Boxspring Bed - Hettich AxisDrive IPS Operating And Mounting Instructions Manual

4. Description of the Product

4.1 Technical data

Designation:
Type:
Year of build:
Site of setup:
Mains connection:
Power consumption:
Output:
Standby power:
Stroke:
Pressure force:
Adjustment speed:
Adjustment noise in dB(A):
Dimensions
(length x width x height):
Weight:
Operating options:
Frequency range at
radio version:
Batteries for
transmitter:
Batteries for
emergency lowering:
Intermittent operation:
Ambient temperature
in operation:
Storage-/
transport temperature:
Humidity
in operation
(non-condensing):
Protection type:
* Idle, without load
12
12
Double drive for adjustment of
comfort beds for use at home
AxisDrive
2016
dry, closed rooms
100 - 240 V ; 50/60 Hz
1.6 A
depending on load, 30-300 W
≤ 0.5 W
e.g. 87 / 69 mm (head/foot section)
e.g. 2x 6500 N
max. 5,8 mm/s*
≤ 50 dB*
707 x 147 x 120 mm
3.9 kg
by handset cable or transmitter
2.4 GHz
2 AAA 1.5V
1 or 2 9V block batteries
type: 6LR61
max. 2 min. operation, then
18 min. out of operation
10 °C to 40 °C
- 25 °C to 70 °C
5 % to 85 %
IP 20

4.2 Device components

The double drive AxisDrive is an electro-motor-powered unit.
Using suitable fittings for motorized adjustment, the head and/or
foot section of boxspring beds (Fig. 5) or slatted bed frames
(Fig. 6) can be adjusted. The drive is controlled via handset cable
or transmitter (see 2.3 scope of delivery)

Fig. 5: Boxspring bed

Fig. 6: Slatted bed frame

The compact build has two linear adjustment units, as well as the
control and the mains unit, placed in an enclosed housing.
For tool-free installation, the two sliding covers  must be
disconnected from the housing (Fig. 7).
Fig. 7: Sliding cover
