Transport And Mounting; Transport; Mounting - Hettich AxisDrive IPS Operating And Mounting Instructions Manual

5. Transport and Mounting

5.1 Transport

Move the double drive / slatted bed frame only when powered
down (power cable disconnected from the mains).
14
14

5.2 Mounting

Danger
Danger to life from electric power!
The housing of the double drive must not be
opened, removed or damaged.
Before connecting the drive system, among
others correspondence of the electricity type and
mains voltage with the information on the name
plate of the mains unit must be observed.
Mounting errors may cause fatigue breaks at the double drive.
 Mount the drive in the slatted bed frame or boxspring bed
without producing any shear tension due to offset of the
electrical fittings. Observe parallelism and tolerances as
described in 4.2.2 Dimensions of the Motor hooks /
Electrical Fittings.
Observe the adjustment movement caused by the drive when
designing your bed.
Mount the double drive so that shearing and crushing

points are not accessible from the outside.