Preface - Hettich AxisDrive IPS Operating And Mounting Instructions Manual

(Original)
Operating and Mounting Instructions
according to EC Machinery Directive 2006/42/EC,
Appendix VI for the Incomplete Machine
Double drive for adjustment of comfort beds
for use at home
Type: AxisDrive
Produced for: Hettich Franke GmbH & Co. KG
Hinter dem Ziegelwasen 6/1
72336 Balingen
Year of build: 2016
Date / status: 2016-02-03
2 2

Preface

Warning
Read these operating and mounting instructions
with care to acquire thorough knowledge
regarding the double drive and how to mount it.
Mount the double drive according to these
instructions to prevent injury and damage to the
double drive. Do not install the double drive based
on your assumptions.
Keep these operating and mounting instructions
at hand and check them if you are uncertain
about how to perform any procedure.
The operating and mounting instructions are a
separate part of the overall documentation.
The overall documentation must be made
available to the mounting, operating and
maintenance staff.
Contact:
Hettich Franke GmbH & Co. KG
Hinter dem Ziegelwasen 6/1
72336 Balingen
Copyright for the operating and mounting instructions
© 2016 by Hettich Franke GmbH & Co. KG
The copyright in these operating and mounting instructions
shall remain with Hettich Franke GmbH & Co. KG.
These operating and mounting instructions are intended for
the mounting staff. They contain technical provisions and
drawings that must not be wholly or partially reproduced,
distributed or used or disclosed to others for competitive
purposes without authorisation.