Speed Dialing; Using Calling Features - AT&T Partner Series Installation And Use Manual

Speed Dialing

Using Calling Features

You cannot use calling features
from a rotary telephone.
To dial a Speed Dial number (from a touch-tone phone only):
1.
Lift the handset.
You hear the intercom dial tone.
2.
Press [ ] plus the 2-digit Speed Dial code (20 to 29).
#
The system automatically selects an outside line and dials the Speed Dial
number.
You can use two calling features with a standard touch-tone telephone by press-
ing [ ] plus a 2-digit code. (The [
#
phone.) Table 5-1 shows the calling features you can use.
Table 5-1 Using Calling Features with Standard Phones
Feature
Last Number Redial
Recall
To use a calling feature on a standard telephone:
If you are not already on a call . . .
Lift the handset.
1.
You hear the intercom dial tone.
2. Dial [ ] plus the 2-digit dial code.
#
If you are on an outside call . . .
1. Rapidly press and release the switchhook.
You hear an intercom dial tone and the call is put on hold.
2.
Press [ ] plus the 2-digit dial code.
#
The system automatically returns you to the outside line you were on and then
activates the feature.
For a complete description of what calling features do, and when to use them,
see p. 4-11.
] replaces the [ ] button on a PARTNER
# Feature
How to Use It
Press [ ] [ ] [ ]
# 0 5
Press [ ] [ ] [ ]
# 0 3
Using Standard Telephones
5-5