Personal Speed Dial; Call Waiting - AT&T MERLIN LEGEND Release 2.0 Single-Line Telephone Quick Reference Manual

OFTEN USED FEATURES

Personal Speed Dial

Use this feature to program 2-digit codes with
numbers you dial most often.
To program pefsonal speed dial codes:
1.
Lift handset.
2.
Dial # 00.
3.
Dial # and 2-digit code from 01 to 24.
4.
Dial 21.
5.
Dial phone number.
6.
Repeat Steps 3-5 to program additional
numbers.
7.
Hang up.
To use personal speed dial codes:
1.
Lift handset.
2.
Dial # and 2-digit code (01-24).
System Speed
Dial
Use company-programmed 3-digit codes
to dial phone numbers. Ask your system
manager for these codes.
1.
Lift handset.
2.
Dial # and System Speed Dial code.
Paging
To use speakerphone paging:
1.
Lift handset.
2.
Dial company-provided Group Page or Page
All number.
3.
Make announcement after beep.
To use loudspeaker paging:
1.
Lift handset.
2.
Dial # 9 , then loudspeaker page line number
provided by your company.
3.
Dial code for zone, if necessary.
4.
Make announcement.
Copyright © 1992 AT&T
MERLIN LEGEND is a trademark of AT&T
Park
To park a call:
1.
Press switchhook or Recall button to put the call
on hold.
2.
Dial your extension.
3.
When you hear a busy signal, hang up.
To return to a call you parked:
1.
Lift handset.
2.
Dial # .
To use park and speakerphone paging:
1.
Press switchhook or Recall button to put the call
on hold.
2.
Dial your extension.
3.
When you hear a busy signal, hang up.
4.
Lift handset, then dial Group Page line.
5.
Announce call and give your extension.
You can pick up a parked call at your extension without
waiting for it to ring back by dialing #
Pickup
To use:
1.
Lift handset.
2.
Dial # 9 and the extension or number where the
call is ringing or parked.
To use group pickup:
1.
Lift handset.
2.
Dial # 88.

Call Waiting

You hear one beep for inside calls; two beeps for outside
calls.
To complete a call and answer a waiting call:
1.
When you hear the call waiting tone, hang up the handset.
2.
Lift handset.
To put a call on hold and pickup a waiting call:
1.
Press switchhook or Recall button to put current
call on hold.
2.
Dial # 87 to connect to the waiting call.
To return to the held call, press the switchhook or Recall
button. (If you hang up, the held call will ring back at your
phone.)