AT&T Partner Series Installation And Use Manual page 32

Line Ringing
If you want to set up your system
so that all incoming calls come
through a receptionist, you
would change the setting so the
other phones do not ring.
Abbreviated Ringing
Receptionists and others who
handle many calls prefer to turn
Abbreviated Ringing off so that
they can be reminded of
unanswered calls.
3-4
Customizing Your System
Line Ringing lets you set all, some, or no outside lines to ring on each individual
extension. The factory setting is for each outside line to ring on all extensions.
Change this setting if you want one or more lines on any extension not to ring.
Procedure:
Press [ ] [ ] [
1.
Feature 0
The phone beeps once, the lights of the four line buttons no longer show the
status of the lines, and the light next to the [
2. Press the left [
Intercom
The light next to the button is green steady.
3. Press the right [
Intercom
4. Dial the 2-digit number (10 to 21) of the extension you want to change.
The light next to each line button is steady green if the setting is for "ring;" green
flutter if the setting is for "no ring."
If you want to change the setting for any line at that extension, simply
5.
press the line button. To change the setting for another extension, return
to step 3.
The light changes to show the setting.
When you are finished, press [
6.
The system comes set up so that when an incoming call rings at a busy phone,
it will ring once and then stop ringing while the green light next to the line or
intercom button continues to flash. Turn Abbreviated Ringing "off" if you want
a phone to continue to ring until it is answered.
Procedure:
Press [ ] [ ] [
1.
Feature 0
The phone beeps once, the lights of the four line buttons no longer show the
status of the lines, and the light next to the [
2. Press the left [
Intercom
The light next to the button is green steady.
Press [ ] [ ] [ ] [
3.
# 3 0 5
4. Dial the 2-digit number (10 to 21) of the extension you want to change.
The Message light is steady red if Abbreviated Ringing is "on;" red flash if it is
"off."
5. Press [ ] to turn on Abbreviated Ringing, or press [
1
ated Ringing. If you make a mistake or want to change the setting, return
to step 3.
The light changes to show the setting.
When you are finished, press [
6.
].
0
Spkr
] button twice.
] button.
] [ ] [
Feature 0
].
0
Spkr
] button twice.
].
] [ ] [
Feature 0
] button is green flutter.
].
0
] button is green flutter.
] to turn off Abbrevi-
2
].
0