Speed Dialing - AT&T Partner Series Installation And Use Manual

Speed Dialing

All system users should get a
copy of the Speed Dial form in
appendix B.
To dial the Speed Dial number, a
user simply presses [ ] and
Feature
the 2-digit code.
You can also use this procedure
to program a new Speed Dial
number over another one already
assigned to a 2-digit code. Sim-
ply enter the new number.
You must use a PARTNER 12-
button phone at extension 10 to
remove a Speed Dial number
from memory.
Speed Dialing allows you to store up to 10 outside numbers in the system's
memory. Any user can dial these numbers automatically by pressing only three
buttons. Speed Dialing saves time and effort, and can spare people from con-
stantly looking up telephone numbers. Appendix B provides a form on which to
list the Speed Dial numbers.
You can use Speed Dialing to dial automatically certain numeric sequences
other than regular telephone numbers. For example, some banks and financial
services allow you to transact business over the telephone. After dialing the
call, you are usually requested to enter your account number by pressing the
numbers on the dialpad. These additional numbers can be included in the
Speed Dial number.
You can also include the Pause, Stop, Touch-Tone Enable, and Recall functions
in a Speed Dial number. See p. 3-7 for instructions.
To store a Speed Dial number (from extension 10):
1.
Press [ ] [ ] [
Feature 0 0
2.
Press [ ], then press the 2-digit code between 20 and 29 that you
Feature
want to assign to the Speed Dial number.
3.
Enter the Speed Dial number (up to 20 digits long). (If you want to include
special functions in the number, such as Pause, Stop, Touch-Tone Enable,
or Recall, see p. 3-7.) To store another Speed Dial number, return to
Step 2.
When you are finished, press [
4.
IMPORTANT:
When programming and/or testing emergency numbers (such
as 911 or other emergency services):
1. Remain on the line and briefly explain to the dispatcher the reason for the
call before hanging up.
2.
Perform such activities during the off-peak hours, such as early morning or
late evening.
To remove a Speed Dial number from memory (from extension 10):
1.
Press [ ] [ ] [
Feature 0
2. Press [ ], then press the Speed Dial number's 2-digit code.
Feature
3. Press [ ]. To remove another number, return to step 2.
Mic
4. When you are finished, press [
].
] [ ] [ ].
Feature 0 0
].
0
] [ ] [
Feature 0 0
Customizing Your System
].
3-5