Advertisement
Removing the Chassis Cover
Before working inside the system, make sure the system has been powered off and disconnect
all power cords and cables.
The 8 mounting screws on the sides and bottom of the system are used to secure the cover to
the chassis. Remove these screws and the COM port screws.
Installing the microSD Card
The microSD card slot is located on the Qseven module internally. You may need to remove
the Qseven module first to access the card slot. Then insert the card straight into the socket.
microSD card
Qseven module
Installing a Mini PCIe and SIM Card
The system board is equipped with 2 Mini PCIe slots.
One Mini PCIe slot (with SIM card slot) provides both
USB and PCIe interfaces whereas the other Mini PCIe
slot provides only mSATA interface.
Before inserting a SIM card into the socket, you have
to remove mounting screws on the speaker. Insert the
SIM card into the SIM card socket, and push it to take
the card out of the socket.
Speaker
Mounting screw
SIM card socket
Note: Be sure to place the card with the IC facing down
and the angled corner aligning with the socket's angled
corner so it will be correctly in contact with the system
board.
3
Mini PCIe Slot
mSATA Slot
Advertisement
