Table of Contents
Advertisement
Operating Instructions
4.
Analogue output
4.1
Range set low
4.2
Range set high
4.3
Lower limit
4.4
Upper limit
4.5
Alarm value
4.6
Calibration 4 mA
4.7
Calibration 20 mA
Input: 0 ... 22 mA
Input: 0 ... 22 mA
Input: 0 ... 22 mA
Input: 0 ... 22 mA
Input: 0 ... 22 mA
Selection:
Set output current
Selection:
Set output current
(Standard: 4 mA)
(Standard: 20 mA)
(Standard: 3 mA)
(Standard: 20 mA)
(Standard: 3 mA)
The current can be set
via key functions and adjusted at
the receiving end.
The current can be set
via key functions and adjusted at
the receiving end.
25
Advertisement
Table of Contents
