Table of Contents
Advertisement
Operating Instructions
6.4 One or more sensor system
Up to three sensors can be connected to a transmitter if, for example, a larger flow section needs to be
illuminated. In the transmitter, the corresponding number of sensors will then be registered and a joint
average value will be calculated from their measurements.
The sensors are registered in menu 7 (System):
The existence of several sensors is shown on the online display and in the info area on the display.
Apart from registering the sensors and the resulting monitoring of several sensors by the transmitter, this
function has no effect on the operation and will not be described in any more depth.
20
Advertisement
Table of Contents
