Table of Contents
Advertisement
Operating Instructions
6. Operator interface
The operator interface differs depending on the system design:
DIN rail housing without display, operation via PC software
•
Field housing with display, alternative operation via PC software
•
One to three sensor system
•
First of all, the different system versions are described below. Following that, the basic operation of the
SolidFlow 2.0 system as a one sensor system is then described without going back over the different versions.
6.1 Differences between the DIN rail and field housing transmitter
The transmitter in the DIN rail housing is only a part of the functions available in the field housing.
The following overview clarifies the differences between the two versions.
Function
Menu system
via PC software
•
via display
•
Measurement value display current output
Measurement value display pulse output
Alarm system relay output
Remote control digital input
Autocorrect analogue input
Totaliser display
via PC software
•
via display
•
Error output
on current output
•
at relay
•
via PC software
•
via display
•
on status LED
•
The transmitter in the DIN rail can only be configured via a serial connection and a PC program. On the
transmitter in the field housing, all functions can be configured by menu via the touch-sensitive display.
The field housing transmitter can also be configured by PC.
The menu items on the display and in the PC software are numbered in a uniform manner so that
they can be referred to later on.
Field housing
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
DIN rail
yes
no
yes
no
yes
no
no
no
yes
no
yes
yes
yes
no
yes
16
Advertisement
Table of Contents
