Table of Contents
Advertisement
Operating Instructions
6.5 Menu structure
The menu structure supports the user when adjusting the measuring range, the calibration, the measurement
values and the choice of additional functions. In this connection, the numbering both on the display and in
the PC interface is identical:
1.
Measurement range
1.1 Tag No
1.2 Unit
1.3 Time scale
1.4 Decimal point
1.5 Set point low
1.6 Set point hight
1.7 Filter
1.8 Median filter
Input: Free text (10 characters)
Input: Unit text, e. g. kg
Selection: hour / minute /second time base for the integration by the
Selection: 0000, 0.000, 00.00, 000.0 Number representation and decimal point-
Input: 0 ... 9999
Input: 0 ... 9999
Input: 0.0 s ... 999.9 s
Input: 1 ... 128
Name of the measurement point or product.
Required mass flow unit.
totaliser and the pulse output.
accuracy in the measurement menu.
Throughput rates under this value will
not be displayed at the current output.
This does not concern the display indicator,
totaliser or pulse output.
Throughput rates above this value
will not be displayed at the current output.
This does not concern the display indicator,
totaliser or pulse output.
Filtering of measurement for the indicator
and the output values.
Distortion filter for peak measurement -
input. Acts like an additional filter to the filter
value [ s ] [ 1.7 ].
This filter directly impacts the raw value
extraction and thus all other calculation
steps.
21
Advertisement
Table of Contents
