Related Manuals for Midea SmartShell MR01
Summary of Contents for Midea SmartShell MR01
- Page 1 ROBOT INSTRUCTION Please read this manual carefully before operating, and keep it properly.
-
Page 2: Table Of Contents
Do not place this product in a place where it drops easily (such as a table Safety Instructions or chair). Contents Precautions The product may not work properly under strong light. Product Description Do not bend the wires excessively or place heavy objects and sharp Instructions for Use objects on the machine. - Page 3 PRECAUTIONS 3. Please arrange the location to be cleaned, and put the furniture and chairs in the proper position to avoid the machine being trapped. Warning: 1. Do not use the product in wet or watery areas. Roll up the edges of the carpet or use it on a short-haired carpet. 2.
-
Page 4: Product Description
Product Description Charging dock X1 Remote control X1 Cleaning tool X1 Batteries for remote HEPA control X2 MR02 only: Cloth bracket X1 Dry cloth X1 Instruction manual Side brush X4 Power adapter X1 package X1... - Page 5 Product Description Illustration of Main Unit Dust bin Primary filter Bumper HEPA bracket Upper flip cover HEPA Dust bin PUSH Power button Charging dock Automatic charging Steering wheel pole piece Left brush IR signal transmitting station Right brush Signal indicator Vacuum port Battery cover IR pilot signal transmitting window...
- Page 6 Product Description Description of Remote Control Panel Note Install two AAA batteries before use. In the vicinity of the charging dock, the machine may not be able to recognize the commands from the remote control. If you do not use the remote control for a long time, On/Off remove the batteries.
-
Page 7: Instructions For Use
Instructions for Use Note A. Make sure that the power switch is on before charging, or else the red indicator will flash rapidly, accompanied by the buzzer sound; Battery Charging B. When the machine is charging, the “ ” clean button changes to slowly changing red color; C. - Page 8 Press and hold the On/Off button on the remote control or the “ ” button on the Random cleaning machine for 3 seconds to put the machine into sleep mode. Press and hold the “ ” button to wake up the machine. The remote control can be activated by pressing the Press on the remote control to switch to random cleaning mode.
-
Page 9: Maintenance
1. It is recommended to wash the filters after using for 15-20 days. The maximum life of the HEPA is 24 months. 2. Make sure that the filters are dry before installation. 3. HEPA and primary filter are all replaceable accessories. For accessories, please contact Midea after-sales service: RoboticVC@midea.com. 4. Do not expose the filters to sunlight. -
Page 10: Troubleshooting
Troubleshooting Cleaning Machine Please refer to the table below if the product has any problem during use. Cleaning sensor and wheels: Gently wipe the sensor and the wheels with the cleaning tool or soft cloth, as indicated on the right. Possible cause Solution Problem... -
Page 11: After-Sales Service
5. When contacting After-sales Service, please fill in the warranty information, take a photo and attach to the email so that you can get a reply as soon as possible. If the product fails to meet your expectations, please contact Midea After-sales Service: Email: RoboticVC@midea.com...
Need help?
Do you have a question about the SmartShell MR01 and is the answer not in the manual?
Questions and answers