Safety Instructions • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. • The appliance is only to be used with the power supply unit provided with the appliance.
Structure of the product Assembly and parts description Cordless vacuum cleaner Charging port Hand vacuum Detachable Low/High hand vacuum mode Power button Battery Dust cup button indicator lever One-click Battery lights dust cup indicator release lights Handle Bottom lid Nozzle Release button for hand vacuum Filter assembly...
Page 5
. Slide the wand onto hand vacuum Drywall anchors until it lock (Fig. 1). Push the wand into motorized floor nozzle until it lock (Fig. 2). • Choose location near power outlet. Cord Locate point high enough on wall clip nozzle to hang freely.
Page 6
Power button sweeping 1. Click power button once to start (Fig 1). Vacuum starts on High mode. Choose Low/ High button to switch between modes. back and forth on area to be cleaned. Avoid oversized or sharp items (such as screws) with cleaner.
Page 7
Use with or without wand. • 2-in-1 upholstery tool: Use brush to vacuum blinds, vents or upholstered surfaces. Use felt portion to clean delicate surfaces. To switch between felt and brush portions, press thumb release and slide brush up or down. How to use hand vacuum Ideal for cleaning stairs.
Cleaning and Maintenance CAUTION Dust cup – Empty after each use Do not operate vacuum 1. Press cleaner without all filters. Filter Screen and dust cup 2. Pull out 3. Press should be in proper position. WARNING: Moving parts! Recharge cleaner after each use.
Page 12
A quality product of Customer Care Email: customercare@midea.com.ph Toll free: 1-800-10-863-5522 Landline: (02) 8863-55-22 Viber/SMS: (0917) 863-5522 Monday - Sunday / 8:00am - 8:00pm...
Need help?
Do you have a question about the MVC-V18P and is the answer not in the manual?
Questions and answers