Finishing - Roland CAMM-3 PNC-300 User Manual

13. Finishing

After cutting has been finished, detach the tool, remove the material, and clean away chips.
The tool blade can cause injury to the hand even when not in motion.
1
Press the [MENU] key to make the following screen
appear on the display.
3
Open the cover and detach the tool.
5
Use a commercially available vacuum cleaner to
remove chips inside the box.
NOTICE
Do not use a compressed air for such cleaning.
Cutting chips in the air may attach to a portion
of the machine and cause malfunctions or
breakdowns.
22
2
Press the [VIEW] key for at least 0.5 seconds.
4
Remove the material.
After finishing, be sure to wash the hands with
water to remove any adhering cutting chips.