Table of Contents
Advertisement
22
6. InStALLAtIon
Movements described in this chapter must be carried out exclusively by qualified
staff specifically trained to carry out loading, unloading and movement of packages in
complete safety using lifting tools such as cranes or forklifts. Local staff should be aware
of accident prevention rules.
ATTENTION! Ensure the vehicles and the logical structures used comply with the use
permitted and that they are in perfect condition; keep your distance from suspended
loads, ensure the ropes or straps used for lifting are in perfect condition and adequately
inserted in the specific hooks.
6.1
Transport and delivery
Transport can be carried out using the following communication routes: road, rail, sea
and air.
The weight of the item is deducible from technical features and the packaging. Movement
of the individual item must be carried out using suitable means of movement such as a
self-propelled forklift or a manual forklift.
Apply the necessary attention for safe work.
The device is delivered assembled wrapped with a knock-proof, bubble wrap film.
ATTENTION! On receiving the device, check with the carrier that the material is intact, that
it was not damaged during transport or it was not voluntarily opened and parts removed
from within. Check the supply corresponds with the order specifications and use the
delivery documents to ensure the delivery is complete.
If the packaging is damaged externally, open it in the presence of the carrier and check
the bed was not damaged.
Note any damage on the delivery documents and immediately inform Pam Mobility s.r.l.
If the packaging is not damaged, check the bed externally within 24 hours of delivery. If
damage is attributed to transport, immediately inform the carrier and insurance
company, as well as Pam Mobility s.r.l.
6.2
Lifting
WARNING! Lifting and movement operations must be carried out by specialist staff trained
for this type of movement.
ATTENTION! When lifting slowly tighten the straps and check there are no components
unsuitable to support the weight of the unit.
To guarantee safe movement of the bed, strictly comply with the following indications:
▪ Ensure the lifting vehicles are suitable for the weight of the bed.
▪ Exclusively use flat lifting straps.
▪ Place the lifting straps near the trolley frame and not the base frame.
▪ If forklifts are used, place the bed over a suitable platform, locking the four castors.
▪ Lift the bed off the ground as little as possible.
Adjustable height bed Synago - ID01188 - Rev. 0.0 -
15/11/2015
Advertisement
Table of Contents
