62
10. MAIntenAnce
10.1 Periodic control
The user staff must inspect the item at least once a year; the inspection must include
a visual inspection for any damage that could compromise the integrity and correct
functioning of the item. Such as:
▪ power supply cables and plugs must be intact;
▪ power supply cable correctly connected;
▪ screws tight;
▪ correct insertion and fastening of any accessories;
▪ castors clean and product in general clean.
ATTENTION! If damage is found, immediately place the product out of service until
repaired or replaced.
ATTENTION! Cleaning and maintenance operations must be carried out with the bed
disconnected from the electricity mains.
WARNING! Technical staff must check the efficiency of the batteries at least 3 times a
year.
To check the efficiency of the batteries, proceed as follows:
▪ remove the electricity plug from the mains socket;
▪ execute at least two movement cycles for each of the adjustments you can implement
on the bed.
10.2 Technical support
Requests for customer technical support must be sent via fax or via e-mail to the following
address:
Specifying:
▪ the code of the product, the serial number, the batch code, the year of installation;
▪ defects found;
▪ the exact address of the location where the bed is installed.
ATTENTION! all support intervention must only be carried out by Pam Mobility
staff. Support intervention by unauthorised staff can compromise bed functioning
cause damage to property or harm people. Pam Mobility s.r.l. cannot be held in any
and can
way liable for damage to property or harm to people due to support intervention carried
out by unauthorised staff.
10.3 Storage
In the event of storage of the product for long periods, you must:
▪ position it in a dry place away from sunlight;
▪ protect it from dust by covering it with a nylon cloth;
▪ grease the parts that could rust or get damaged if dry.
Pam Mobility s.r.l.
V V ia Verdi, 39 42043
Gattatico (RE)
Adjustable height bed Synago - ID01188 - Rev. 0.0 -
15/11/2015