Table of Contents
Advertisement
Adjustable height bed Synago - ID01188 - Rev. 0.0 - 15/11/2015
7.8
Lifting and lowering the bed
WARNING! Always warn the patient before adjusting the height of the bed.
Height adjustment of the bed is obtained using two electrical actuators controlled from
the free push button panel, from the Supervisor control panel, from the foot pedal and
from the side rail internal and external control panels.
To adjust the height of the bed, the specific command must be enabled (see the
specific paragraphs in the "PUSH BUTTON PANEL/CONTROL" chapter.
WARNING! Never place hands or objects between the base and the moving part. Never
manually intervene on the moving parts and comply with instructions.
To adjust bed height, proceed as follows:
WITH THE FREE PUSH BUTTON PANEL
▪ press button
1g
lift
to
▪ press button
1h
to
lower
FROM THE BILATERAL FOOT PEDAL
▪ using your foot, press pedal
▪ using your foot, press pedal
3a
the bed;
the bed.
3a
to
lift
the bed;
3b
to
lower
the bed.
1g
3b
1h
31
Advertisement
Table of Contents
