Table of Contents
Advertisement
Adjustable height bed Synago - ID01188 - Rev. 0.0 - 15/11/2015
7.4
Moving the bed
WARNING! Always warn the patient before moving the bed.
WARNING! Before moving the bed, ensure the power supply cable is disconnected from
the mains socket and that it is adequately secured to avoid obstructing movement.
WARNING! Movement must only occur on hard, flat surfaces and with the side rails up.
Always lock the bed after movement.
To move the bed, proceed as follows:
▪ ensure the side rails are up;
▪ take the power supply plug out and wind the cable;
▪ release the brakes;
▪ push or pull the bed, grabbing it by the head or footboard;
▪ after the journey, lock the bed.
7.5
Locking and releasing the bed
The bed is equipped with four braking and rotating castors, one of which has a directional
lock.
The command positions are:
Position A:
three castors are free and a directional castor on the head side.
Position B:
the castors are free and turning.
Position C:
the castors are locked.
Position the pedal with one foot to obtain desired functioning.
A
B
c
29
Advertisement
Table of Contents
