Command Locking From Side Rail Command Panel - PamMobility SYNAGO 727T0045 Instructions For Installation And Use Manual

Adjustable height bed Synago - ID01188 - Rev. 0.0 - 15/11/2015
5.5.3

Command locking from side rail command panel

With the external command panels with folding side rails you can lock the folding side rail
internal command panels.
To lock the commands, proceed as follows:
▪ enable the panel by pressing the Start button (6a);
▪ press the (6c) button and then one of the commands relevant to the function you want
to lock: for example, if you want to lock the back section press the button (6c) and the
button (6n); the led corresponding to the function will be OFF;
▪ press the Start (6a) button again to activate the lock set and terminate the operation.
activate
To the commands, proceed as follows:
▪ enable the panel by pressing the Start button (6a);
▪ press the (6c) button and then one of the commands relevant to the function you want
to release: for example, if you want to release the back section press the button (6c)
and the button (6n); the led corresponding to the function will be ON;
▪ press the Start (6a) button again to release the lock set and terminate the operation.
ATTENTION! After 30 seconds of non-use all the control functions are automatically
locked.
21