Binding Table - TRENDnet TI-PG541i User Manual

TRENDnet User's Guide
Parameter Description
Port Select a port number to modify its maximum host count.
Trust Configures the specific port if it is a trust port.
Maximum Host Enter the maximum number of hosts (1-32) that are permitted
Count to simultaneously connect to a port.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.

Binding Table

The DHCP Snooping binding table records the host information learned by DHCP
snooping function (dynamic) or set by user (static). The ARP inspection will use this
table to forward or drop the ARP packets. If the ARP packets sent by invalid host, they
will be dropped. If the Lease time is expired, the entry will be removed from the table.
Static bindings are uniquely identified by the MAC address and VLAN ID. Each MAC
address and VLAN ID can only be in one static binding. If you try to create a static
binding with the same MAC address and VLAN ID as an existing static binding, the new
static binding replaces the original one.
CLI Configuration
Node Command
enable show dhcp-snooping binding
configure dhcp-snooping binding mac
MAC_ADDR ip IP_ADDR vlan
VLANID port PORT_NO
configure no dhcp-snooping binding mac
MACADDR
© Copyright 2019 TRENDnet. All Rights Reserved.
Description
This command displays the current
DHCP snooping binding table.
This command configures a static
host into the DHCP snooping
binding table.
This command removes a static
host from the DHCP snooping
binding table.
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config)#dhcp-snooping binding mac 00:11:22:33:44:55 ip
1.1.1.1 vlan 1 port 2
[DEVICE_NAME](config)#no dhcp-snooping binding mac 00:11:22:33:44:55
[DEVICE_NAME]#show dhcp-snooping binding
Web Configuration
Static Entry Settings
Security > IP Source Guard > Binding Table > Static Entry Settings
Parameter Description
MAC Address Enter the source MAC address in the binding.
Enter the IP address assigned to the MAC address in the
IP Address
binding.
VLAN ID Enter the source VLAN ID in the binding.
Port Specify the port in the binding.
Industrial Managed Switch Series
92