TRENDnet TI-PG541i User Manual page 56

TRENDnet User's Guide
vlan no tagged PORTLISTS
vlan untagged PORTLISTS
vlan no untagged PORTLISTS
interface acceptable frame type
(all|tagged|untagged)
interface pvid VLANID
interface no pvid
configure interface range
gigabitethernet1/0/
PORTLISTS
if-range pvid VLANID
if-range no pvid
configure vlan range STRINGS
configure no vlan range STRINGS
vlan-range add PORTLISTS
vlan-range fixed PORTLISTS
© Copyright 2019 TRENDnet. All Rights Reserved.
This command removes all tagged member
from the vlan.
This command assigns ports for untagged
member of the VLAN group. The ports
should be one/some of the permanent
members of the vlan.
This command removes all untagged
member from the vlan.
This command configures the acceptable
frame type.
all - acceptable all frame types.
tagged - acceptable tagged frame only.
untagged – acceptable untagged frame only.
This command configures a VLAN ID for the
port default VLAN ID.
This command configures 1 for the port
default VLAN ID.
This command enters the interface
configure node.
This command configures a VLAN ID for the
port default VLAN ID.
This command configures 1 for the port
default VLAN ID.
This command configures a range of vlans.
This command removes a range of vlans.
This command adds a port or a range of
ports to the vlans.
This command assigns ports for permanent
member of the VLAN group.
vlan-range no fixed PORTLISTS
vlan-range tagged PORTLISTS
vlan-range no tagged PORTLISTS
vlan-range untagged PORTLISTS
vlan-range no untagged PORTLISTS
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config)#vlan 2
[DEVICE_NAME](config-vlan)#fixed 1-6
[DEVICE_NAME](config-vlan)#untagged 1-3
Web Configuration
VLAN Settings
Advanced Settings > VLAN > VLAN > VLAN Settings
Industrial Managed Switch Series
This command removes all fixed member
from the vlans.
This command assigns ports for tagged
member of the VLAN group. The ports
should be one/some of the permanent
members of the vlans.
This command removes all tagged member
from the vlans.
This command assigns ports for untagged
member of the VLAN group. The ports
should be one/some of the permanent
members of the vlans.
This command removes all untagged
member from the vlans.
53