TRENDnet TI-PG541i User Manual page 36

Industrial managed switch series
Hide thumbs Also See for TI-PG541i:
Table of Contents

Advertisement

TRENDnet User's Guide
configure
interface range
gigabitethernet1/0/ PORTLISTS
if-range
description STRINGs
if-range
no description
if-range
shutdown
if-range
no shutdown
if-range
speed (auto|10-full||10-half|
100-full|100-half|1000-full)
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config)#interface gi1/0/1
[DEVICE_NAME](config-if)#speed auto
Web Configuration
Basic Settings > Port Settings > General Settings
© Copyright 2019 TRENDnet. All Rights Reserved.
This command enters the interface
configure node.
This command configures a
description for the specific ports.
This command configures the
default port description for the
specific ports.
This command disables the specific
ports.
This command enables the specific
ports.
This command configures the
speed and duplex for the port.
Parameter
Description
Port
Select a port or a range ports you want to configure on this screen.
State
Select Enable to activate the port or Disable to deactivate the port.
Select the speed and duplex mode of the port. The choices are:
• Auto
• 10 Mbps / Full Duplex
Speed/Duplex
• 10 Mbps / Half Duplex
• 100 Mbps / Full Duplex
• 100 Mbps / Half Duplex
• 1000 Mbps / Full Duplex
Select On to enable access to buffering resources for the port thus
Flow Control
ensuring lossless operation across network switches. Otherwise,
select Off to disable it.
Apply
Click Apply to take effect the settings.
Refresh
Click Refresh to begin configuring this screen afresh.
Port
This field displays the port number.
State
This field displays whether the port is enabled or disabled.
This field displays the speed either 10M, 100M or 1000M and the
Speed/Duplex
duplex mode Full or Half.
Flow Control
This field displays whether the port's flow control is On or Off.
This field displays the link status of the port. If the port is up, it
displays the port's speed, duplex and flow control setting.
Link Status
Otherwise, it displays Link Down if the port is disabled or not
connected to any device.
Industrial Managed Switch Series
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti-pg102iTi-g160ws

Table of Contents