Sim Card Error; Cooperation With Monitoring System - EBS Active Track Basic+ Operation & Maintenance Manual

10.10. SIM card error

In case of problems with the SIM card the device indicates this fact by blinking
of "Panic" and "Checkpoint" buttons (the "Panic" button will blink slightly less often
and the time of illumination is shorter compared to the blinking of "Checkpoint"
button). In such situation you must verify the SIM card mounting and / or its correct
operation with a mobile phone.

11. Cooperation with monitoring system

Proper using of all functions of Active Track require monitoring system, which
will be able to sent, receive and interpret all messages from Active Track. Main device
in that system is receiver (communication server) and Analyzer software. Analyzer
software interprets data from Active Track device, store them and visualize them in
proper and readable way.
Active Track will sent to the server following information:
PANIC
Pushing of "Panic" button will cause sending suitable message to the receiver.
CALL ME
Pushing "Call me" button will sent proper message.
RFID
After RFID read-out , Active Track device will send unique ID of RFID tag. In case
of repeated read-out mode data will by sent after last RFID read-out (or after
defined time).
SABOTAGE
In case of sabotage (attempt to open the casing) device will send proper
message.
SHOCK
Any instance of the device striking too strongly against a hard surface is
detected and sent to the monitoring station.
MANDOWN
When the emergency consisting immobility of the person holding the device is
detected, the corresponding signal is transmitted to the monitoring system.
TILT
50