Firmware - EBS Active Track Basic+ Operation & Maintenance Manual

 Modem Reset
 Device Reset
In case of no connection with GPRS network the device after recognizing the situation
shall wait during provided time limit and then shall perform programmed actions.

7.2.3.8. Firmware

The device is equipped with built in bootloader - special starting programme that
allows for updating and change of firmware. During programming all information is
displayed in respect of carried out operation.
Click on the field to indicate where the proper file is located. The firmware files
have the ".efi2" extension. Then, after selecting the file, select the file transfer
method: local or remote and press "Start" button.
Note:
The procedure of saving the firmware to the device is the same as the device
programming procedure.
a) The firmware saving process is shown in the special progress window.
b) After completed saving process, wait for a short time before restarting the
device.
From now on, the device operation will controlled by the new firmware.
37