GSMWDT=t
Sets GSM link control, defines time between lost of GSM connection and reset of
GSM modem.
t - time period [in minutes, range: 5 - 999]
To disable this function t must be an empty string.
GETCFG
Gets primary communication parameters of device in form: SERVER PORT APN UN
PW SMS TPERIOD
KILL
Sending this command remotely resets the device.
Example of SMS configuration text message (access code is 1111, skip quotes):
"1111
APN=PGuard.gprs
PORT=6670 DT=05/12/15,13:04 TPERIOD=5"
Note:
Names of programmed parameters (e.g. SERVER) must be in upper-case letters
(see example above).
After changing configuration of Active Track, device must be restarted with
KILL command.
7.2.
Configuration program
GPRS transmitters configurator program should be downloaded from
http://www.ebs.pl website (login:
opening the downloaded file, the installation process will start, during which you
should choose the installation language, enter data, define the location of the program
components (default location is C:\Program Files\EBS\) and create the shortcuts to the
program (on the desktop or on the quick launch bar).
If you have a SIM card with a pre-programmed PIN code other than 1111, you
should first configure the device using the Configurator by entering the pre-
programmed PIN code to the card and only then insert the SIM card into the device.
Otherwise, the card may be blocked (incompatibility of PIN codes).
If you have a SIM card with a disabled PIN code or the PIN code is 1111, you
can insert the SIM card into the device at any time.
7.2.1. Computer – requirements
Minimum requirements for computer system where configuration software is to be
installed:
Hardware:
Processor 1GHz, 32-bit (x86) or 64-bit (x64),
1 GB RAM (for 32-bit) or 2 GB RAM (for 64-bit),
4,5 GB HDD,
AGP3 programming adapter and LX-PROG programming cable (for local
programming).
UN=PGuard
PW=PGuard_pass
ebs
, password:
SERVER=gprs.com
ebs
). After downloading and
17
Need help?
Do you have a question about the Active Track Basic+ and is the answer not in the manual?