Device Monitor - EBS Active Track Basic+ Operation & Maintenance Manual

7.2.5. Device Monitor

"Device Monitor" provides real-time information on Active Track device state. To use
this function Active Track must be connected to PC computer with LX-DATA cable
(using DEBUG plug). Correct RS232 port must be chosen in "Port" field. "Device
monitor" provides following information:
 Battery power indication
 Charger and charging indicators
 GSM network signal level indication
 Bit-Error-Rate level measuring
 Inputs and motion sensor state monitoring
 Ongoing voice and data call indicators
 Type or serial number of device
 Firmware and hardware revision
 Device time
These parameters are also shown in LOG window in text style. All data can be saved
to file.
41