Rfid Transponder Read-Out; Data Transmission; Battery Low - EBS Active Track Basic+ Operation & Maintenance Manual

10.4. RFID transponder read-out

Version of Active Track with built in RFID transponders reader is able to read-out
RFID tags (described in chapter RFID transponder read-out).
After starting of RFID transponder (see: RFID transponder read-out) device waits
for bringing near to the RFID tag. Wait time (15 seconds) is signalized by light on
"Read-out" button. Device confirms RFID read-out by double, short acoustic signal
and switching "Read-out" button light off and on. Next transmission begins.

10.5. Data transmission

Data transmission is being signalled with quick flashing of "Checkpoint" button.

10.6. Battery low

When battery low, it is being signalled with approx. 2-hour advance before
switching off. "Panic" button flashes every 5 seconds and there are two longer sound
signals every 5 minutes. It is recommended to charge the device at once (for more
information, go to Battery charging.
Data transmission
48