Battery Charging - EBS Active Track Basic+ Operation & Maintenance Manual

3. Insert battery. Connect battery connector to outlet in battery cavity. The
connector shape prevents from incorrect placing of battery – in case of trouble
with placing turn battery round and try again.
4. Lay down wires and close lid by screwing bolts.
6.2.

Battery charging

Note:
Using chargers other than advised by The Manufacturer voids guarantee for
the device and may damage it. Current voltage source must be coherent with that
provided on charger's nominal plate.
The device marked with 230V may be supplied from main socket directly.
The device can be turned off from the network by unplugging the power
plug from the wall socket. The socket must be easily accessible - not pledged.
Recorder rating plate is under the battery cover. Charger rating plate is
located on the button.
12