Magtek eDynamo Installation And Operation Manual page 20

3 - Installation
Figure 3-2 – Windows 8.1 Manage Bluetooth Devices Window
10) Select the device and press the
11) Enter default passcode
then press the Next
short period of time, the text
this case, "Connected" means the device is paired, but the host does not have an active data
connection until the host software initiates one.
eDynamo| Secure Card Reader Authenticator | Installation and Operation Manual
Pair button.
(or the device's actual password if it has been configured differently),
000000
button. Windows returns you to the
appears below the device you are pairing with. Note that in
Connected
Page 20 of 34 (D998200110-23)
Manage Bluetooth devices page. After a