Introduction; Explanation Of Symbols - Renkforce RF500 Maker Construction Kit Operating Instructions Manual

Maker construction kit
Hide thumbs Also See for RF500 Maker Construction Kit:
Table of Contents

Advertisement

1. Introduction

Dear Customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and handling. Also consider
this if you pass on the product to any third party. Therefore, retain these operating instructions for reference!
If there are any technical questions, contact:
Germany:
www.conrad.de/kontakt
Austria:
www.conrad.at
www.business.conrad.at
Switzerland:
www.conrad.ch
www.biz-conrad.ch

2. Explanation of Symbols

The symbol with a lightning bolt in a triangle is used where there is a health hazard, e.g. from electric shock. The device contains no
parts that require servicing by the user. Therefore, never open the device.
The symbol with the exclamation mark points out particular dangers associated with handling, function and operation.
This symbol warns of hot surfaces the contact with which may cause injury.
Attention! Danger from moving parts - keep away fingers and other body parts.
This symbol warns of injury that may occur when reaching into the device in operation. Body parts may be crushed, pulled in or
otherwise injured.
This symbol warns of hand injury from the belt drive.
The symbol with the arrow indicates special advice and notes.
The product is intended for use in dry indoor rooms only; it must not become damp or wet.
Observe the operating instructions!
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rf500 preassembled

Table of Contents